Pool Water Treatment / Pool Cleaners

<< Back
Filter Cleaner
Filter Cleaner
Brand: IPG


You can save this product on your favorites list when logged in to your account. Login now


FILTER CLEANER is a cleaner scientifically formulated to insure a better filtration and to prolong filter life.
Removes accumulated dirt in cartridge or sand filters.

FILTER CLEANER is effective in removing scale, rust, oils and cosmetic residues.

1. Stop filter and remove cartridge.
2. In a plastic pail prepare a solution of 1 L of FILTER CLEANER per 20 L of warm water. The solution will be a peach colour.
3. Place cartridge upright in the solution, making sure that there is enough solution to cover cartridge.
4. Allow to soak for about 5 to 6 hours.
5. Remove cartridge and rinse immediately with fresh water.
6. Replace cartridge and start filtration system.
Improves filtration and increases the effectiveness of the filter’s sand.

1. Make sure the pool water is at maximum level above the skimmer.
2. Stop the filter and make sure the skimmer basket is clean and empty.
3. Make sure the filter is on the “Filter” position. Pour the contents of the bottle into the skimmer. 
    Start the filter and let it run for 5 seconds then stop, let stand for 8 hours.
4. After 8 hours change the position of the filter to “Backwash”, start the filter and let it run for 2 to 5 minutes. 
    Stop the filter, put the filtration system back to the “Filter” position and restart.

Waterloo's Online Pool and Spa Equipment and Supply Superstore!