When you start your pool, at springtime or during the regular season, shock
treatments are required and a waiting period is necessary until the residual value
has dropped to the recommended levels of 1 to 3 ppm.
If you wish to decrease the sanitizer residual rapidly, use TERMINATOR and
take advantage of your pool immediately. TERMINATOR will not affect the colouring
of vinyl, cement or fibreglass pools.
To reduce sanitizer level before using your pool:
1. Test the sanitizer
level. If readings are higher than 3 ppm, add TERMINATOR in small quantities (50
ml per 10,000 L of pool water) to reduce high sanitizer level back to acceptable
levels 1-3 ppm. 2. Wait for 1 hour. 3. After adding TERMINATOR, check
water's pH and adjust to 7.2-7.8 if necessary.
RECOMMENDATION: Do not exceed dosage. Use in small increments
and test water between additions of this product